User's Manual

1C - Main Features
1D - Model Types
2 button dip-switch transmitter: Model #: RCS-433MDT2
2 - CODING
Slide open the door to access to the battery and the dip-switches.
The dip-position will give the security code.
Warning: Each transmitter is set-in-factory with the same code on
the dip-switches; it highly advisable to change this code by moving
the dip-switches to any random position ( “+”, “0” , “-”).
3 - MEMORIZATION
Each dip-switch setting code has to be stored into the receiver
memory. The memorization can be done by self-learning. The
instructions for this operation is given on the receiver installation
manual. Your own installer will perform this operation during
the installation or will give you the necessary explanation
during installation.
4 - BATTERY AND DIP-SWITCH ACCESS
To access the battery, slide the battery
door down. Place the 23A alkaline
battery between the 2 contacts.
Respect the right polarity as indicated
on the bottom of the box.
NOTE: Please dispose of the batteries
correctly, they are hazardous waste.
5 - TROUBLESHOOTING
FAULT SOLUTION
The radio signal is not verifiable Replace the transmitter battery
The transmitter led doesn't switch on Replace the transmitter battery
The radio signal is not verifiable Check the power supply of
the receiver
The transmitter led switches on Replace the transmitter battery
GUARANTEE
The guarantee period of all RCS transmitters is 12 months,
beginning from the manufacturer date. During this period,
if the product does not work correctly, due to a defective
component, the product will be repaired or substituted
at the discretion of RCS. The guarantee does not cover
the plastic container integrity. After-sale service is supplied
at the producer's factory.
REMOTE CONTROL SOLUTIONS, LLC
1-866-770-0727
www.rcsremotes.com
FCC ID: ____________
This device complies with FCC Rules Part 15 Operation
is subject to the following two conditions:
1) This device may not cause harmful interferences;
2) this device must accept interference that may cause undesired operation.
Notice: Any changes or modification to RCS equipment not
expressly approved by RCS could void the user's authority to
operate the equipment.
Battery Door
Button
Channel B
Red LED
Button
Channel A
Red LED
Battery
Door
Dip-Switch
Battery
TG6T433MDT2