User's Manual

- 14 -
INSTALLING AND CONFIGURING THE Universal Dragon™ SOFTWARE
Connecting the XTR39 to the PC
To program the XTR39, the unit will need to be connected to a PC.
USB Connection
Open the access cover on the XTR39 and pivot the cover down. Connect the wide end of the
included USB cable to the USB port of your PC and the small end to the connector on the front panel
of the XTR39.
NOTE: The USB connection requires a ‘B’ Type connector to interface with the XTR39. USB cable is
included with the XTR39.
Programming the XTR39 system is a two-step process:
Creating the GUI (Graphical User Interface) Screens.
Assigning functions (macros) to the GTL’s (Graphical Touch Links) to control external devices.
Through Universal Dragon™ Software, both of these tasks are easily performed. The software
contains built-in Style libraries for creating the GUI screens as well as IR-Code libraries for
programming each of the GTL’s. This makes programming the XTR39 a very quick and easy process.
Starting XTR39 Universal Dragon™ Software
After the successful installation of the software, double-click the Universal Dragon™ icon on your
desktop or:
1. From START menu, choose Programs.
2. Select Xantech and click on the Universal Dragon™ Icon from the menu.
3. The program loads and opens to the following Universal Dragon™ opening screen.
Universal Dragon™ Opening Screen