User's Manual

- 25 -
7) Select the command the left side of the Palette Editor (i.e. Power, Play, Stop etc.). A message
stating “Waiting to receive IR” will appear
8) While continuing to keep the source remote within 1” from the IR learning eye, press and
release the corresponding command button on the source remote. A symbol ( ) will appear
to the left of the selected function indicating that an IR code has been learned.
Note: If you wait longer than ten seconds, a time-out message will appear.
Click “OK” and try again. If you continue to have problems learning commands, please see the
Trouble Shooting section at the end of this manual.
Note: When teaching commands in this fashion, only a quick tap of the teaching remote is
required. Do not press and hold the button until the message goes away.
9) Repeat steps 6 thru 8 for all of the source functions to be used on the XTR39.