User's Manual

- 27 -
Creating a Palette File
A Palette File is a file of learned commands that is ready to be placed under a GTL for use in the
XTR39.
Note: As previously mentioned, Palette files created in Universal Dragon™ software (XIR2 method)
cannot be used with other devices.
1. Select to create a new palette file.
2. Then choose to either add a new brand or component (to all brands).
Or right click on the brand/component list on the left side of the palette editor to add a brand or
component (to a specific brand selected or to all brands on the list).
The new component will show up on the list along with RS232, XIR1 and XIR2 palettes added
by default. Note: The XTR39 does not support RS232 commands. The XTR39 will learn IR
commands under the XIR2 format.
Choose the palette to work with and then edit the list of commands as needed.
PLACING COMMANDS ONTO THE GTL’s (Creating Macro’s)
All of the IR Codes (Palettes or IR Command Groups) should be confirmed and tested before
continuing. In the sections to follow, you will be setting up the XTR39 for use in controlling a source.
This will consist of setting up the Source Icons, placing IR commands onto the XTR39.
Selecting IR Palettes from the IR Code Library
1) Click on PALETTE EDITOR on the right side Universal Dragon™ window if it is not already
open.
2) Click on the mode button to change the “Mode: Edit” to “Mode: Palette”
3) Click on the Component Type (i.e. VCR, DVD etc.) and then the Manufacturer.
4) Find the Command Group file previously tested