User's Manual

- 29 -
Testing Commands Placed on the virtual XTR39 Window
Commands placed under buttons in the virtual XTR39 window may be tested prior to downloading. To
test commands, the PC must be connected to the XTR39 and the XTR39 must be pointed at the
source to be controlled.
In Universal Dragon, under the menu items, change from Normal Mode to Test Mode.
Select the appropriate GTL button in the XTR39 window with the IR codes placed under it to test. (i.e.
PLAY button). The button should now appear selected.
Commands listed under the Macro Command List for that selected Command should now be
executed in order of appearance.
TRANSFERRING THE PROJECT
The project can now be transferred to the XTR39.
NOTE: Before continuing, make sure the PC is connected to the XTR39 and a ‘BASE UNIT WHO AM
I’ can be performed.
To transfer the project to the XTR39, complete the following steps.
1) Click on BASE UNIT and select ‘Who am I…’, and “XTR39” from the menu list. Verify a valid
response is received.
2) Click on FILE and select ‘Transfer Project’ from the menu list or simply press CTRL + B on the
PC keyboard.
3) A file transfer dialog box should appear and start showing progress of the transfer process.
4) A spinning wheel will appear on the XTR39. This indicates project data from the PC is being
transferred to the XTR39. Do not disturb the connection between the PC and XTR39 until the
transfer is complete.
5) The XTR39 will automatically restart with the newly create project.
Congratulations, you have finished programming the XTR39!