User's Manual

TheaterTouch System Controller
4
•
A serial port for communication with the TheaterTouch Designer programming
software.
•
Non-volatile flash memory. The TheaterTouch

will not lose any programmed
data when the batteries are exchanged.
•
One-year parts and labor warranty.
IMPORTANT NOTES
Please read these important notes about the TheaterTouch:
•
The TheaterTouch should be placed in an area where it is around normal room
temperature (between 60°F to 90°F). If the temperature is too hot, the display
appears dim. If the temperature is too cold, the display appears dark and may
respond slowly.
•
Do not use sharp objects on the touchscreen. It is designed to operate with a
touch of your finger.
•
Do not let the TheaterTouch get wet. It should not be handled with wet hands
or placed in an area where it could get wet.
•
Do not subject the TheaterTouch to smoke, dust, or vibrations. The display may
be damaged from excessive shock or vibration.
•
Use only the power supply that is provided with the TheaterTouch. Using the
wrong type of power supply may result in battery leakage or other damage.
•
Do not disassemble the unit. The TheaterTouch contains high voltage circuits
that may cause injury if contacted.
CLEANING
Occasional cleaning may be required, depending on use.
To clean your TheaterTouch:
1. Remove the battery pack from the TheaterTouch.
2. Lightly dampen a lint-free cloth with water or mild detergent and wipe the
touchscreen, keypad and outer surfaces.