User's Manual

TheaterTouch System Controller

IR CAPTURE

This button displays a window that allows the TheaterTouch to align, learn,

and test infrared commands from donor remotes. Used together with the

TheaterTouch Designer Infrared Library Manager software you can create a

custom database of infrared commands.

The use of the IR Capture command is described in chapter 6 “IR Library

Manager”.

To exit

IR CAPTURE

mode, press the Main Menu button on the remote.

CLEAR ALL

This button displays a window that will allow you to erase the current

program in the TheaterTouch remote. When the button is pressed, you will be

prompted to enter the current passcode. If the proper code is entered, the

entire program in the TheaterTouch will be erased.

WARNING

This will erase the complete program in the

TheaterTouch

with no way to

restore it, except by reloading the program from the

TheaterTouch Designer

software!

If you inadvertently press the

CLEAR ALL

button, simply press the

ENTER

button without entering the passcode and you will be returned to the Control

Panel page.