User's Manual

TheaterTouch System Controller

seconds. After you have set your desired delay time, drag the

Time Delay

icon from

the right to the macro display on the left.

Release the mouse button at the location where you would like to add the time delay

step.

The

Button Test

step causes the macro to execute the following

steps ONLY IF the button that the macro is attached to is Held Down for a specified

amount of time or Double-Clicked within a specified amount of time, depending on

the option selected.

The

Button Test

steps are conditional statements or “Else” commands meaning that if

the condition is met the first command will be sent and if the condition is not met the

second command will be sent.

Held Down -

In the example above, if the button is held down for 0.3 seconds, the

command will execute. If the button is not held down for 0.3 seconds, the

command will not execute.

This can be used to make a source button that switches pages if pressed briefly, or

switches pages and turns equipment on if held down for the specified amount of

time. This can also be used to send a command when pressed briefly, or send a

different command when held down.