User's Manual

Chapter 5 • TheaterTouch Designer Advanced Features
45
Default -
Check this option to set the default output type for this
command to the button default. The button default is the option
selected on the
Output
tab of the
Edit Button Properties
command.
IR -
Check this box to force this command
to transmit IR directly out
the infrared window on the front of the remote, regardless of the
system setting.
RF -
Check this box to force this command button to transmit IR via RF
through the IRF-6, regardless of the system setting.
RF ID Code:
Unless the system contains more than one IRF-6, this option will not normally
need to be changed.
Default -
Check this option to set the default RF ID code for this
command to the button default. The button default is the ID code
selected on the
Output
tab of the
Edit Button Properties
command.
Code -
Check this option and enter an ID Code in the box to force this
command to transmit a specific RF ID code when in RF mode,
regardless of the system default setting.