User's Manual

TheaterTouch System Controller
52
Default RF ID Code:
Use this to set the default RF ID code. This RF ID code will
be used for all RF buttons unless it is set differently in the properties for each
button. The ID code switch on the back of the IRF-6 must also be set to this
setting.
IRF-6 TAB
The
IRF-6
tab lets you label the outputs of the IRF-6. Use the pull down list to choose
the IRF-6 ID code for which you wish to modify the labels. You can modify the labels
of all ten possible IRF-6 ID codes independently. The labels are optional and are only
used to make it easier for you to remember what equipment is plugged into each IRF-
6 output.
Send -
Click this button to send the current settings directly to the remote.