User's Manual

T2-C Universal System Controller
2
UNPACKING AND INSPECTION
After unpacking your new T2-C universal system controller, save
all of the packing materials in case you ever have to ship the unit.
Thoroughly inspect the T2-C and packing materials for signs of
damage. Report any damage to the carrier immediately. Report
any equipment malfunctions to Remote Technologies
Incorporated or an authorized Remote Technologies Incorporated
distributor.
PRODUCT CONTENTS
Contents within the box include the following items:
§ One (1) T2-C universal system controller
§ One (1) Docking station.
§ One (1) Universal power supply for docking station
§ One (1) Operation guide.
SOFTWARE REQUIREMENTS
The recommended minimum system requirements needed to run
the TheaterTouch Designer software are as follows:
§ Windows 98SE
®
, Windows ME
®
, Windows 2000
®
, Windows
XP
®
or later version.
§ A free USB port.
§ At least 64 Megabytes of RAM.
§ At least 100 Megabytes of free disk storage.
§ Screen resolution of 800x600 with 16-bit color.
§ A mouse is required.
§ Optional printer for printing reports.
Operation
19
CALIBRATE TOUCHSCREEN
This button runs a routine that allows you to calibrate the
touchscreen. Since it normally should not be necessary to calibrate
the touchscreen, this routine is included as a precaution only.
Warning: Do not attempt to calibrate the touchscreen with
your fingertip. Proper calibration requires a stylus or other
fine tip. Do not use metal objects such as ball point pens or
screwdrivers that can damage the surface of the
touchscreen.
Press the Calibrate button to continue.
Follow the directions on the display to complete the calibration
process.