User's Manual

M2 Universal System Controller
4
§ A USB port for communication with the TheaterTouch
Designer programming software.
§ Non-volatile flash memory. The M2 will not lose any
programmed data when the battery is removed.
§ One-year parts and labor warranty.
§ Available only to system integration professionals.
IMPORTANT NOTES
Please read these important notes about the M2:
§ The M2 should be placed in an area where it is around
normal room temperature (between 60°F to 90°F). If the
temperature is too hot, the display appears dim. If the
temperature is too cold, the display appears dark and may
respond slowly.
§ Do not let the M2 get wet. It should not be handled with wet
hands or placed in an area where it could get wet.
§ Do not subject the M2 to smoke, dust, or vibrations. The
display may be damaged from excessive shock or vibration.
§ Do not disassemble the unit. Service of the M2 should be
performed by authorized personnel only.
§ Use only high capacity primary (non-rechargeable) batteries.
Alkaline batteries, such as those included with the M2,
should provide several months of operation before requiring
replacement.
CLEANING
Occasional cleaning may be required, depending on use. To clean
your M2, lightly dampen a lint-free cloth with a glass cleaner or
mild detergent, and wipe the display, keypad and outer surfaces.