User's Manual

M2 Universal System Controller
12
TILT SWITCH
This selection displays a window that allows you to adjust the
settings for the built-in tilt switch. The tilt switch is a motion
detector that turns the remote on when activated.
On means the tilt switch is active and will wake up the M2 when
it is moved.
Off means the tilt switch is inactive.
Press either of the OK soft buttons to close.
CHANGE PASSCODE
This selection displays a window that allows you to set the
passcode that is used to limit access to the Clear All function in
the Control Panel, as well as the Secured property that can be
assigned to any button.
When you select the CHANGE PASSCODE function, the screen will
prompt you to enter the old passcode using the numeric keypad
buttons. Press the ENTER keypad button after entering the
numbers.
(The default code is 0000).