User's Manual

M2 Universal System Controller
14
CLEAR ALL
This selection displays a window that will allow you to erase the
current user program in the M2. You will be prompted to enter
the current passcode. If the proper code is entered, the entire user
program in the M2 will be erased.
Warning! This will erase the entire user program in the M2. Once
this is done there is no way to restore it, except by reloading the
program from the TheaterTouch Designer software!
If you inadvertently select the CLEAR ALL function, simply press
the ENTER keypad button without entering the passcode and you
will be returned to the Control Panel page.