User's Manual
11
It’s Under Control
®
CHAPTER 2 | INTRODUCTION
FEATURES
The T2-Cs provides superior quality and reliability as well as these features:
Ergonomic design permits effortless, one-handed operation.
Full color TFT LCD to display custom buttons, text, graphics and
animations.
Integrated high-resolution touchscreen.
Simplied graphics programming.
Thirty-nine assignable/programmable keypad buttons.
Three-way rocker switch for scrolling list navigation.
Tilt switch can automatically turn on the backlight when picked up.
Extremely bright, backlit display and keypad.
Intuitive layout of keypad buttons for commonly used functions.
Transmits IR and RF (or both - on a single button press!).
Optional RF receiver allows you to transmit through walls, cabinets,
etc.
System includes a Lithium-Ion battery and docking station.
Extremely wide IR transmitting frequency range.
Optional ‘Voltage’ and ‘Video’ sensing modules to monitor power status
of equipment when used with certain RTI processors.
Optional interface for RS-232 controlled equipment when used with
certain RTI processors.
Non-volatile Flash memory stores your system conguration even
when power is not present.
USB Programming.
IMPORTANT NOTES
Please read these important notes about the T2-Cs:
The T2-Cs should be placed in an area where it is around normal room
temperature (between 60° F to 90° F). If the temperature is too hot,
the display appears dim. If the temperature is too cold, the display
appears dark and may respond slowly.
Do not use sharp objects on the touchscreen. It is designed to operate
with a touch of your nger.
Do not let the T2-Cs get wet. It should not be handled with wet hands
or placed in an area where it could get wet.
Do not subject the T2-Cs to smoke, dust, or vibrations. The display may
be damaged from excessive shock or vibration.
Only use the power supply that is provided with the T2-Cs. Using the
wrong type of power supply may result in damage to the battery or
electronic components.
Do not disassemble the unit. Service of the T2-Cs should be performed
by authorized personnel only.