User's Manual

Installation
Mounting the ZXT-120 to a wall
MOUNTING LOCATION PRECAUTIONS
- Before mounting, check the material and structure of the mounting location. If the
location does not have the proper material or structure, the ZXT-120 can fall and cause
injuries.
- Use commercial items that best match the wall structure and material for the screws
and other fixtures.
- Do not mount near a kitchen counter, humidifier, or other location in which it can be
exposed to smoke or steam. Doing so could cause a fire or electrical shock.
- Do not mount in locations with high humidity or large amounts of dust. Doing so could
cause a fire or electrical shock.
- Do not mount to locations subject to high temperatures, high humidity, or exposure to
water. Doing so could cause a fire or electrical shock.
- Do not mount to locations subject to large amounts of vibration, large jolts, or large
forces. These could cause an injury if the ZXT-120 falls and breaks.
MOUNTING PROCEDURE PRECAUTIONS
- Do not modify parts or use the ZXT-120 in ways other than its intended use. Doing so
could cause the ZXT-120 to fall and result in an injury.
- Be sure to fully check that there are no electrical wires or pipes inside the wall before
mounting.
- If any of the screws are loose, the ZXT-120 can fall and cause an injury. Do not mount
the ZXT-120 with the screws still loose.
- Check that the two screws mounted to the wall are fully inserted into the key holes of
the ZXT-120. Otherwise, the ZXT-120 can fall and cause an injury.
- Do not mount the ZXT-120 so that it sticks out from the wall edge. It could get hit by
people's bodies or objects and cause an injury.
- Supplier will not be liable for any accidents or injuries that occur due to improper
mounting or handling.
- When mounting, be careful not to get your fingers pinched or injure your hands.
18