User's Manual

Table Of Contents

Controller and Gateway Requirements

The ZXT-120 can work with any Z-Wave compliant controller or gateway supporting the

following Z-Wave commands.

- Configuration Command Class

- Multilevel Sensor Command Class

- Thermostat Command Class

> Thermostat Mode Command Class

> Thermostat Fan Mode Command Class

> Thermostat Set-point Command Class

Built-in IR code library

The Built-in IR code library supports most of the popular air conditioner brands in the

market. Z-Wave gateway and controller does not need to have any IR control code

knowledge. User can use Z-Wave controller or gateway to select the IR code according to

the ZXT-120 code list separately provided through Z-Wave configuration command.

Glossary

Device or Node

Devices and nodes are all terms to describe an individual Z-

Wave device. These are all interchangeable when setting up

your Z-Wave network.

Inclusion

Add a Z-Wave device to the network.

Exclusion

Delete a Z-Wave device to the network.

Remove

To take a device out of a group, scene or association group

while that device still exists in the same Z-Wave network.