User's Manual
Table Of Contents
8
IR Code Learning
Step Procedure / Description Status Indicator
1
Refer to your primary controller user
manual, enter to the browser page that
can input the Conguration parameter
2
Look up Below mapping table for
learning, and decide the IR setting you
intent to learn next.
3
Open the Gateway’s Configuration
Brower page input parameter number
“25” and parameter value (according to
below Mapping Table), then complete the
Conguration process.
Then Green Indicator
still turns ON for
indicating the IR Code
Learning Start
4
Aim the Original Air Conditioner Remote
at AC Master according to below position
within 1-3cm
Press "Power ON" button on the Original
Air Conditioner Remote. If the Learning
is failed, repeat Step 3 to step 5, To learn
next IR code, repeat Step 2 to step 5.
Successful:
Green Indicator ashes
TWICE
Unsuccessful:
Red Indicator flashes
TWICE