MULTIMEDIA MASTER Remote Transmitter & USB Remote Receiver Owner’s Manual
1.2 Getting to know your Multimedia Master Remote 1 Introduction 1 Congratulations! Your Multimedia Master Remote is a state-of-the-art device which delivers a remote control system to home personal computer at your fingertips. Before operating the remote, please read thoroughly this manual. Then, reserve it for future reference. 1.1 Key Features Remote Transmitter Unit 1. Infra-red lens 2. LED indicator/Windows OS shut down 3. Remote ball 4. Hard keys 5.
1.
6 Troubleshooting IMPORTANT: Compatible program list: Only the below listed programs are compatible for your Multimedia Master Remote: Q : My remote does not work at all !!! Windows Media Player 6x, 7x, 8x, 9x WinAmp 2.0, 3.0 CyberLink Power DVD 4.0/5.0 A: A: 4 Operating your remote A: A: Check whether your batteries are inserted properly and are in correct +/– marks. If the batteries are weak, replace the batteries. See “ 1.4 How to install batteries for Remote Transmitter unit ”.
BW6130 MANUAL UPDATE (Nov 1, 2004) 1) Quick Setup Guide: Please follow the below steps to setup your Multimedia Master Remote a. Install the provided software and device driver first and follow the on-screen instruction. b. After installed the software and device driver, restart your computer system. c. Connect the USB Remote Receiver Unit with the provided USB Cable to one of the available USB port on your computer system. Place your USB Remote Control Receiver Unit to a free area near your PC monitor. d.
MultiMedia Remote Control User Guide Please follow the below steps for installation of your MultiMedia Master remote. 1) Software and Driver Installation 2) Setup the MultiMedia Master Remote Control 3) Using the Multimedia Master Remote Control 4) FAQ Chapter 1 – Software and Driver Installation 1- Do not connect your MultiMedia Master remote control until the software and driver is installed. 2- Insert the installation CD Disk into your CD Drive, and select the file “setup.
5-You can specify a Destination to install the software of Multimedia Master Remote Control, or use the suggested default path. 6- The software will start to install and should take about 2 minutes for the installation process.
7. Restart your computer to update the necessary configuration of your Windows system. The software installation is completed. Chapter 2 - Setup the MultiMedia Master Remote Control After the computer is re-started, you should be able to see a new icon on your windows tool bar. This icon should be blurred, as your MultiMedia Master remote control set has not yet connected to your computer.
Select the option “Search for the best driver for your device.” Keep the Installation CD disk of the MultiMedia Master in your CD Drive, and click the option ‘CD-ROM drive’, then ‘Next’.
Your computer should be able to locate the driver for the device, click ‘Next’ to continue the installation of the device driver. Icon for Multimedia Master 100 Now you can see the icon of the Multimedia Master remote control is active. You may now start to setup the MultiMedia Master remote control program. Just simply double click the icon of Multimedia Master, the below setting dialogue box will pop up.
Application boxes In this dialogue box, you can see that there are 3 application boxes which represent what software that you will use to control by the program key ‘1’, ‘2’, ‘3’ on your MultiMedia Master remote. Now you need to setup each application box one by one, e.g. WinAmp for listing MP3/CD Music, then assign WinAmp to Program Key ‘Application 1’. Click the ‘Application 1’ box and the below dialogue box will pop up.
The second setting is instructing the location of the corresponding execution file of the selected program. For each media softwares, it should have an execution file to start up with. Simply we have already provided the default path for those software. If you have changed the path during the installation of the Media Player software (e.g. WinAmp 5), you need to input the correct path manually, e.g. Winamp was installed in the drive “D:\winamp/winamp.
Under the ‘Shortcut’ folder, you can see the execution path from the “Target” row. Just copy the content of the Target column and paste on to the Multimedia Master program. Test button You can now click the test button to check if you have input the right execution path or not The Winamp player should be started after you pressed the Test button.
Finish Button (Important!!) Just follow the above above steps to setup the other Application keys. After that, do not forget to press the ‘Finish’ Button to save the setting before you quit. Chapter 3 - Using the MultiMedia Remote Control In this example, I am currently using Winamp for MP3 music and Window Media Player 6 for movie, and my setting is showing as below: In the setup option, I have selected ‘Application 1’ button for Winamp 5 program.
Winamp Now I can start to control the WinAmp player, with the below function keys: A) Media Player function keys 1) 2) 3) 4) 5) Play; Stop; Pause; Previous; Next.
Program Control keys B) Master Volume Keys Or the Master Volume Keys, they are directly controlling the Windows master output volume instead of the volume control under the media software. (e.g. Press the ‘mute’ key on the remote control and you could see that the speaker icon is showing Mute on the windows tool bar.
C) Remote Ball You can use the analog remote ball for controlling the mouse cursor. The L/R button to perform the Left / Right mouse click function, also the left click can be performed if you apply a short-press to the mouse ball. Mouse control The speed of the mouse cursor can be adjusted in the setup page as below: Adjust the speed of the mouse cursor D) Power Off Button You could switch off your computer by this button. After a short-press of it, a shut down dialogue box will pop up.
Power Off button Chapter 4 - FAQ Q : My remote does not work at all !!! A : Check whether your batteries are inserted properly and are in correct +/– marks. A : If the batteries are weak, replace the batteries. See “ 1.4 How to install batteries for Remote Transmitter unit ”. A : Check if you have installed the provided software and device driver. A : Check whether your USB Remote Receiver Unit is connected to an available USB port of your computer. Q : I cannot activate any multimedia program.
6. Real Player 10 7. Direct DVD 5 8. Win DVD 5 9. Musicmatch Jukebox 8 10. Sonique 1.9 11. Foobar 2000 12. JetAudio 6 13. Media JukeBox 8 14. Quintessential Player 4 15. Power Cinema 3 16.