Specifications

21
3
If the ZTS-100 is removed from the
network, it shows no connection.
Exclusion is completed.
4
Press “Home＂ key once to go
back to the home page.
Add (Inclusion) ZTS-100 to Gateway / Controller Z-Wave network
Step Procedure / Description LCD indication
1
Gateway / Controller device should
entry the inclusion mode.
Press and hold “Home” key for 2
seconds to entry the Add
(Inclusion) / Delete (Exclusion)
Mode.
2
Press “Prog＂ key once, it will
search the network.
3
If the ZTS-100 is added into the
network, the signal of “done” will
be shown.
Inclusion is completed.