Specifications

5
Glossary
Device or Node
Devices and nodes are all terms to describe an individual Z-Wave
device. These are all interchangeable when setting up your Z-Wave
network.
Inclusion
Add a Z-Wave device to the network.
Exclusion
Delete a Z-Wave device from the network.
Remove
To take a device out of a group, scene or association group while
that device still exists in the same Z-Wave network.
Z-Wave Network
A collection of Z-Wave devices is controlled by primary and
secondary controllers operating on the same system. A Z-Wave
network has its own unique ID code so that controllers not in the
network cannot control the system.
Primary Controller
The first controller is used to set up your devices and network. Only
the Primary Controller can be used to include or delete devices
from a network. It is recommended that you mark the primary
controller for each network for ease in modifying your network.
Secondary Controller
A controller containing network information about other devices
within the network and is used for controlling devices. Secondary
controller is created from the Primary Controller and cannot include
or delete devices to the network.
Inclusion Controller
A controller containing network information about other devices
within the network and is used for controlling devices. Inclusion
controller is created from the Primary Controller in a SIS enabled
Z-Wave network. Inclusion Controller has the ability to add and
remove devices from the network.
Scene
A collection of Z-Wave devices configured to turn to a specific
level, setting, mode, or perform an operation. Scenes are usually
activated by a controller, timed event, or specific conditions.