User's Manual

Wireless LAN Access Point( RFMD) WA110 User Manual

Quick Start to Connect Access Point:

4.6. Connect Access Point ( AP) to Computer

You can either connect AP to an Ethernet or AP to a computer by RJ-45 Cross-Over cable.

Please avoid other computers to use any I P addresses on the Ethernet.

4.7. Setting Up I P address of Windows 2000

4.7.1. Open Netw ork Properties

Double-click on Network and Dial-up Connections on Control Panel and Right-Click on the

connection and select Properties.

4.7.2. Check the Existence of I nternet Protocol ( TCP/ I P)

If Internet Protocol (TCP/ I P) exists, please skip to 5.2.4. If I nternet Protocol (TCP/ I P) does

not exist, please continue the procedure of 5.2.3.