User's Manual

Wireless LAN Access Point( RFMD) WA110 User Manual

5. Modify Configurations by AP SNMP Manager:

5.1. AP SNMP Manager

Atmel Utilities  AP Conf iguration  AP Conf iguration

5.1.1. Connect to Access Point

Select File  Connect to Access Point .

A screen Connect to Access Point will pop up:

 IP Address: Type I P address of AP (Please refer to section: 5.4.1 I P Address)

 Community: Type a password to connect AP. (The default password is “public”)

 Authority:

1. User: Read Only! You can only read AP conf igurations.

2. Administrator: Read and modify! You can not only read but also modify AP

conf igurations.

After completing all settings, click OK to connect to

5.1.2. Find Access Point

Select File  Find Access Point .

A screen Available Access Points will pop up and list all the available Access Points on the

same subnet. Choose one of the AP and Click Connect to connect it.

A screen Connect to Access Point will pop up. Please repeat the procedures shown on

section 5.1.1.