User's Manual

Wireless LAN Access Point( RFMD) WA110 User Manual
17
 Wireless Bridge: All Bridges should use the same channel in the same connection.
 Point-to-Point: You have to f ill in the MAC address of t he Bridge that you want
to connect.
 Point-to-Multipoint: I n Point-to-Multipoint mode, you don’t have to set MAC
addresses.
 Wireless Repeater Mode: This mode is used in order to increase the coverage area
of an ESS. The Wireless Repeater starts acting as an AP after it has associated itself
with another AP (Parent AP). From that point on, STAs can get associated to it and
the user can configure the device with the utilities available. You have to f ill AP
BSSI D in Preferred BSSI D f ield. The ESSI D and Channel of AP Client should be the
same as AP.
5.5.3. Modify Authorized MAC Adresses
Select Setup  Wireless LAN Authorized Mac Address
Different from most other conf igurations on Setup menu, all settings could be valid in this
frame.
 Load f ile: You can build a text f ile, which contains a list of MAC Addresses.
i.e. 001122334455
998877665544