Wireless LAN Access Point User’s Manual Wireless LAN Access Point User’s Manual Version 1.
Wireless LAN Access Point User’s Manual Copyright Statement No part of this publication may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission form Remotek Corporation, as stipulated by the United States Copyright ACT of 1976. This device complies with Part 15 of the FCC rules.
Wireless LAN Access Point User’s Manual FCC RF Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Wireless LAN Access Point User’s Manual Contents 1. I ntroduction: .........................................................................................................6 2. Features: ...............................................................................................................7 3. Environment Requirement: ................................................................................7 4. I nstall AP SNMP Manager: ...............................................................
Wireless LAN Access Point User’s Manual 7. 8. Wireless LAN AP Operation Modes: ................................................................23 7.1. Wireless LAN Access Point ................................................................23 7.2. AP Client ..............................................................................................23 7.3. Bridge ..................................................................................................24 7.3.1.
Wireless LAN Access Point User’s Manual 1. I ntroduction: Ethernet Host Host Host Adaptor AP Host Wireless LAN Adaptor Adaptor Host We can use AP to connect Ethernet and Wireless LAN. Adaptors can send packets through AP to Ethernet.
Wireless LAN Access Point User’s Manual 2. Features: Compliant with 11 Mbps I EEE802.11b high data rate specif ication Seamless roaming within the 802.11 and 802.
Wireless LAN Access Point User’s Manual 4. I nstall AP SNMP Manager: 4.1. Execute the I nstallation Program Put the I nstallation CD into the CD-ROM of PC, and execute the installation program Setup.exe . You’ll see the welcome page of the installation program. For next step, click Next to continue. 4.2. Select Destination Folder You’ll f ind where the f iles will be installed in this frame. I f you want to change the destination folder, please click Browse to select the folder to install.
Wireless LAN Access Point User’s Manual 4.3. Select Program Folder You’ll f ind where the program links will be installed in this frame. I f you want to change the program folder, please type the name in the f ield of Program Folders. For next step, click Next to continue. 4.4. Before Start to Copy Files You’ll f ind all settings of this installation in this frame. I f you want to change the settings, please click Back to the frame that you want to f ix up.
Wireless LAN Access Point User’s Manual 4.5. I nstallation Complete You’ll see this frame if the installation is completed successfully, click Finish to continue。 You may need to restart your PC after installation to make all registries valid. I f you accept to restart computer immediately, select Yes, I want to restart my computer now and click Finish to restart your PC.
Wireless LAN Access Point User’s Manual 5. Quick Start: 5.1. Connect your AP to your PC Please connect your AP to the Ethernet where your PC is, or connect your AP to your PC by RJ-45 Cross-Over cable. Please avoid the other PCs on the Ethernet to use any I P addresses of 192.168.0.xxx / 255.255.255.0 on the Ethernet. 5.2. Setting up I P Settings of Window s 2000 5.2.1.
Wireless LAN Access Point User’s Manual 5.2.3. I nstall I nternet Protocol ( TCP/ I P) Click I nstall… in connection properties frame. Select Protocol and click Add…. After all, select I nternet Protocol (TCP/ I P) and click OK. Windows 2000 will install TCP/ I P protocol. 5.2.4. Setting up Configurations of I nternet Protocol ( TCP/ I P) Select I nternet Protocol (TCP/ I P) , and click Properties. Select Use the following I P address. Fill “192.168.0.XXX” in I P address f ield, and f ill “255.255.
Wireless LAN Access Point User’s Manual 5.3. Connect to AP by using AP SNMP Manager Please execute AP SNMP Manager, select Connect to Access Point on File Menu. Fill “192.168.0.1” in the f ield of I P Address and f ill “public” in Community f ield, select “Administrator” of Authority f ield. After all, click OK to connect to AP. I f AP SNMP Manager connects to AP successfully, you can read or modify any conf igurations of AP.
Wireless LAN Access Point User’s Manual 5.4. Modify I P Settings of AP Select I P Conf iguration from Bridge submenu on Setup menu. You can change the conf igurations of I P Address, I P Mask, Gateway, DHCP Enable, and Primary port here. Primary port is where the DHCP server is. 5.5. Dow nload Changes to AP or Refresh Setting from AP Select Download Changes on File menu, then all settings will be downloaded to AP. After that, AP SNMP Manager will command AP to reset.