User's Manual

Wireless LAN Access Point User’s Manual
11
5. Quick Start:
5.1. Connect your AP to your PC
Please connect your AP to the Ethernet where your PC is, or connect your AP to
your PC by RJ-45 Cross-Over cable. Please avoid the other PCs on the Ethernet
to use any I P addresses of 192.168.0.xxx / 255.255.255.0 on the Ethernet.
5.2. Setting up I P Settings of Window s 2000
5.2.1. Open Netw ork Properties
Double-click on Network and Dial-up Connections on Control Panel, and
Right-Click on the connection and select Properties.
5.2.2. Check the existence of I nternet Protocol ( TCP/ I P)
If Internet Protocol (TCP/ I P) exists, please jump to 5.2.4. If Internet Protocol
(TCP/ I P)
doesn’t exist, please continue the procedure of 5.2.3.