User's Manual

Wireless LAN Access Point User’s Manual
16
6.1.2. Connect to Access Point
After Click Connect to Access Point on File menu, or after select connection
target from APs List, the “Connect to Access Point” frame will appear.
 IP Address: Your AP’s I P Address.
 Community: Community to connect your AP.
 Authority: You can only read conf igurations from AP if you select
“User”. If you select “Administrator”, you can read the conf igurations
and also modify the conf igurations.
After all settings, click OK to connect to AP.
6.2. Close Connection of AP
Select Close Connection AP on File menu to disconnect the connection between
PC and AP.