User's Manual

Wireless LAN Access Point User’s Manual
19
6.4.2. Modify Filtering Configuration
Select Filtering from Bridge submenu on Setup menu. If you check I P Routing,
only I P Packet will pass through AP between Ethernet and Wireless LAN.
6.4.3. Modify Privacy Options
Select Filtering from Wireless LAN submenu on Setup menu.
 Key 1 ~ Key 4: Fill keys for WEP. 13 octets for 128-bit WEP, and 5
octets for 64-bit WEP.
 Default Key: Select default key from Key 1 ~ Key 4.
 WEP: Select WEP mode. 64-bit WEP, 128-bit WEP, or disable WEP.
6.4.4. Modify Wireless Operation Settings
Select Operation Settings from Wireless LAN submenu on Setup menu.
 Access Point Name: Fill in User-Friendly Name.
 ESSI D: Fill in Access Point’s ESSI D. Adaptors could roam over the APs
that have same ESSI D.
 Channel: Working channel through Channel 1 ~ Channel 13
 Fragmentation Threshold: Packet fragment size.
 RTS Threshold: RTS will not send if the packet is smaller than RTS