User's Manual

R ESPONDER SETTINGS AND KEY TASKS
Other Responder Settings
11
Other Responder Settings
To change Responder settings, follow these steps:
1. Press On/Off to turn on the Responder.
2. Highlight Settings in the main menu and press Select.
3. Use the arrow buttons to highlight the setting you want to change. Press
Select.
4. See the information for the setting you chose in the table below. Press
Select after changing a setting.
Responder Key Tasks
Turning On/Off
1. To turn on, press the On/Off button and hold it down until the Responder
is on.
2. To turn the Responder off, press the On/Off button.
Setting Description
About Shows you the firmware version and connected
Receiver name. Use the arrows to scroll up and down.
Contrast Lets you increase or decrease screen contrast using the
arrow buttons.
Search for Networks Searches for the Receivers in range and lets you select
one to connect to.
Assign Owner, Reset
Owner, and Change PIN
(not available on
MathFacts in a Flash
Responders)
Lets you assign a student owner, change the owner,
change the owner’s personal identification number
(PIN). For more information, see page 12.
Security Lets you enter the encryption key if it is required for
communication with the Receiver. Contact
Renaissance Learning for more information.
Firmware Update Lets you choose another firmware version or update to
a newer version. See page 9.