* Installer: Leave this manual with the New Owner * Also be sure to check the grill box completely for ALL parts including the rotisserie spit rod (if applicable) Renaissance Cooking Systems Owner’s Manual For Outdoor Use Only America's Best Value in Outdoor Kitchen Equipment Installation, Operation, Maintenance Instructions & Parts List RJC26A, RJC32A, RJC32AL, Models: RJC40A, RJC40AL, RON30A, RON38A & RON42A These grills are tested and certified to the ANSI-Z21.58/CSA 1.6.standards.
Contents Page For Your Safety Safety Rules Clearance to Combustibles BTU Ratings Gas Barbecue Specifications LP Tank Requirement Installation Location/Cut Outs Gas Connections Electrical/Wire Diagram Burner Adjustments Lighting Instructions Operation First Time Operation Cleaning and Maintenance Gas Conversion /Trouble Shooting Troubleshooting Parts Diagram Warranty 3-7 8 5 & 12 10 10 11-12 12-14 15-16 16-18 19-20 20 21 22 23 24-26 26 27-32 33 Message to the Proud Owner Congratulations on the purchase o
Safety and Installation Instructions GRILL INSTALLATION This gas grill must be installed in accordance with all local codes. If installation is planned in an area with no local codes, the gas grill must be installed in accordance with the National Fuel Gas Code ANSI Z223.1 and storage and handling of liquefied petroleum gases, ANSI/NFPA 58 or CSA B149.1 natural gas and propane installation code.
FOR YOUR SAFETY 1. Do Not store or use gasoline, caustic or other flammable vapors and liquids in the vicinity of this or any other appliance. 2. An LP cylinder not connected for use shall not be stored in the vicinity of this or any other appliance. TESTED IN ACCORDANCE WITH ANSI STANDARD FOR OUTDOOR COOKING GAS APPLIANCES. THIS GRILL IS FOR OUTDOOR USE ONLY. Check your local building codes for the proper method of installation.
Safety and Installation Instructions Location of your Barbecue Most importantly, this is an outdoor appliance. Ensure your barbecue is positioned safely away from anything that can catch fire. Under no circumstances is this barbecue to be used indoors. This includes garages or any other enclosed area. Clearance from Combustibles: Ensure your barbecue remains at a distance of at least 24” from any combustible material such as wood, gyprock, paper and plants.
Model/Part Number RWGM - RJC26A/RJC32A/RON30A BEFORE RWGL - RJC40A/RON38A/RON42A AFTER Adequate Ventilation: Ensure there is adequate ventilation for both the barbecue and cylinder. This is required for proper combustion and to prevent gas build up. Firm Level Surface: Use your barbecue only on a firm level surface. This barbecue is not designed for recreational vehicles, and shall not be installed on a boat or any marine craft.
|Page
Safety Rules 1. It is important to follow these rules to avoid fire hazard, property damage or bodily injury from improper installation or usage of the grill. For safety, READ all rules carefully and check local codes. 2. It is prohibited to install the grill in recreational vehicles/mobile homes, trailers, boats, etc. The grill is for outdoor installation and use only. 3. Ensure proper installation by following the installation instructions.
Gas Connections Check gas type – use only the type of gas indicated in the rating plate. Do NOT connect an unregulated gas source to the appliance. You MUST use the regulator(s) that are available from RCS. Safe and satisfactory operation depends to a great extent on the proper installation of the appliance. The installation must comply with the local codes, or in the absence of local codes, with either the National Fuel Gas Code, ANSI Z223.1 or CAN/CGA – B149.1 or 149.2.
GAS BARBECUE SPECIFICATIONS BURNER INPUT RATING Grill Model Main Burners Rear Burners Total BTU’s RJC26A RJC32A / RJC32AL RJC40A / RJC40AL RON30A RON38A RON42A 12,000 12,000 12,000 15,000 15,000 15,000 12,000 12,000 12,500 12,500 12,500 36,000 60,000 72,000 57,500 72,500 72,500 Natural Gas Connection: Appliance pressure Inlet pressure 4” W.C. 5” – 14” W.C. Check with your local gas utility company or with local codes before installing gas lines.
The RONHK hose kit is shown here. To connect, insert the regulator inlet into the tank valve and turn the black coupler clockwise until the coupler tightens up. DO NOT OVER TIGHTEN THE COUPLER. After completion of assembly, make sure all appliance control valves are OFF then turn the tank supply valve on and then turn the control valves on the grill to the ‘HI/IGN’ position for 10 seconds to purge the line of air. Inspect the hose before each use of the appliance.
regulator must be used. Replacement of pressure regulators and hose assemblies can be purchased from authorized dealers. The cylinder supply system must be arranged for vapor withdrawal. Make sure the LP cylinder has a collar to protect the cylinder valve. Do not store a spare LP gas cylinder under on near this appliance. (a) Never fill the cylinder beyond 80 percent full. (b) If the information in (a) and (b) are not strictly followed, a death-causing fire or serious injury may occur.
solve your problem but may be a possible alternative to changing the location of the grill if it has been installed with the rear of the grill facing the prevailing winds. Model/Part Number RWGM - RJC26A/RJC32A/RON30A RWGL - RJC40A/RON38A/RON42A BEFORE AFTER Built-in Installation For non-combustible cabinet enclosure installation only. Follow the cut-out dimensions as shown. ALL outdoor kitchen cabinets MUST include ventilation.
Model RJC26A RJC32A /RJC32AL RJC40A / RJC40AL RON30A RON38A RON42A “A” Width 23 1/2” 30 5/8” 37 ¾” 33” 41” 45” “B” Depth 21” 21” 21” 20” 20” 20” Model RJC26A RJC32A / RJC32AL RJC40A / RJC40Al RON30A RON38A RON42A 14 | P a g e “C” Height 8 ¼” 8 ¼” 8 ¼” 11” 11” 11” Lid Clearance 25” 25” 25” 23” 23” 23”
| P a g e
If adding a side burner to your connection: Electrical Electrical outlet for Rotisserie motor must be installed to the left side of the grill. The outdoor cooking gas appliance, when installed, must be electrically grounded in accordance with local codes or, in the absence of local codes, with the National Electrical Code, ANSI/NFPA 70, or the Canadian Electrical Code, CSA C22.1. Keep any electrical supply cord and fuel supply hose away from any heated surface.
Electrical Wire Diagram 17 | P a g e
Leak Testing NEVER USE AN OPEN FLAME TO CHECK FOR LEAKS. All gas piping and connections must be tested for leaks after installation or service. All leaks must be corrected immediately. Remember-before exchanging an empty bottle for a new one, make sure all control valves are in the “off” position. With the LP regulator connected to tank and grill and the grill knobs turned to OFF. Open the valve on the tank. Test for leaks by applying liquid soap solution to all joints. Bubbles forming indicate gas leak.
If flame is lifting, remove the front panel to access the burner front (air shutter) then turn the air shutter clockwise reducing this intake. The screw should be loosened before turning the air shutter. If the flame has more yellow than blue, the air shutter should be turned counter clockwise allowing more air in. This will stabilize the flame. Make sure to tighten the screw after adjustments are made. In order to provide gas to the burner, the orifice must be inside the burner venturi opening.
Operation DO NOT LEAVE YOUR GRILL UNATTENDED WHILE IN OPERATION. Grill: Grill burners are controlled individually with control knobs. After lighting, turn the knob to HI, LO or in between as desired. Turn on as many burners as required. The top cover may be closed during grilling. Keep the top cover in closed position during the pre heat period.
First Time Operation MAIN BURNERS: Before cooking with your grill the first time, burn off any foreign matter and rid the unit of any odors by operating the unit for about 10 minutes with all lower burners on high. The flame should have a bluish color to it. It may have a tint of yellow and adjustment to the air shutters can be made to obtain a blue flame with a slight yellow tip. Although the grill can be operated with the hood closed, do not continually operate the rotisserie burner with the hood closed.
Cleaning and Maintenance Cleaning: Your Bar-B-Q grill works better and lasts longer if properly cleaned and maintained. Clean the grill after each use. Turn grill off before starting to clean. Protect your hand with a good mitt when cleaning the hot grill. Use a wire brush, dip in water and scrub the cooking grids to soften and loosen food spills. The food spills will fall into the crumb pan. Do not use Aerosol cleaners on hot grill surface.
The burners, control area, crumb pan, etc. should be kept clean at all times. During prolonged non-use of the grill, spiders & insects can nest in areas that will adversely affect the functioning of the grill. Check burner inlets, orifice hood (gas inlet to burner), igniter, sparkers, etc. thoroughly and clean before use. Fuel (Gas) Conversion Instructions for RCS grills.
Fuel Conversion of Main Burners: 1- Determine the existing gas type. (LP or Natural gas) Changing the gas type and orifice change out is the same for both gases. 2- You must remove all grates and burner covers to expose the main burners in the grill. 3- On the bottom rear of each burner is a cotter pin. Remove pin. 4- Slide burner to the rear of the grill and up. Repeat for each burner. 5- Where the burner was located going through a hole in the basin and connecting to the valve is now evacuated space.
Rotisserie Burner Conversion: 1- Remove the back panel at the rear of the grill, this will expose the V shaped or pyramid shaped brass orifice. 2- Remove the existing orifice and replace with change out orifice. 3- Replace rear panel Trouble Shooting Problem Solution Burner will not light - Check gas supply to burner by manually lighting the burners. - See electrode for visible damage, replace if damaged.
RJC26A/RJC32A/RJC40A Enlarged View 26 | P a g e
RJC26A/RJC32A/RJC40A Parts List ITEM PART NO.
RJC32AL / RJC40AL Enlarged View
RJC32AL/RJC40AL Parts List ITEM 1 2 3 4 5 6 7 8 9 11 12 13 14 15 16 17 18 19A 19B 20A 20B 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 PART NO.
RON30A/RON38A/RON42A Enlarged View 28 | P a g e
RON30A/RON38A/RON42A Parts List 29 | P a g e
New Lifetime Warranty RCS is proud to unveil the industries most comprehensive warranty program. All RCS grill components, sideburners, doors and drawers are now guaranteed for the lifetime of the original owner. All RCS refrigeration products are warrantied for five years to the original owner. This new RCS warranty is effective for product sales beginning January 1st, 2018. This warranty excludes normal surface corrosion, discoloration, surface scratches and surface rust which may occur during use.
