Use and Care Manual

OWNER’S MANUAL | RENANIM ADJUSTABLE BED | MODEL: SerenityFlex
You may contact us at: [e-mail]. | [phone] 10
REMOTE CONTROL AND FUNCTIONS
Memory Setting:
HOW TO RESET TO FACTORY SETTINGS AND SET TO YOUR PREFERRED POSITIONS
Setting M1 & M2 positions, and resetting the TV/LOUNGE/ZG positions if you are not satisfied with the factory
setting:
1. Press the FLAT button to flatten the bed.
2. Adjust the bed to your preferred position by pressing
head and foot up/down button.
3. Press and hold the setting button M1/M2/TV/LOUNGE/ZG, and let go after hearing the “didi” sound, which indicates
the setting has been successfully programmed.
4. Repeat the process for a second set.
REMOTE CONTROLLER LOCK SETTING
1. Press the head down and the foot up buttons at the same time,
the blue backlight starts flashing to indicate that the remote
the controller has been successfully locked.
NOTE: This is to prevent children’s disoperation.
2. Repeat the process to unlock the remote controller.
EMERGENCY RESET
If you temporarily cannot reach the remote controller,
press the little button at the side of the control box or
the little button on the extension wire to return the bed
to the flat position.
Restart the bed by unplugging it from power and plugging it back in after an hour or more. This can fix any electronic
issues that prevent some features from working.
GET TO KNOW HOW YOUR BED WORKS