User guide

25
the swiss power source
24
Through-hole mounting
Battery Holders
Horizontal mounting
F
eatures
• Easy and fast replacement of the battery
•
Designed for automatic pick&place mounting
• Safe retention of coin cell
• Automated battery mounting possible
• Clear separation of connections
• Protection against short-circuits
• Protection against inverse polarity (polarized)
• Protection against leak currents
• Robust design
• Suitable for wave-soldering
S
pecifications
• Holder material: heat-resistant, glass fibre
f
illed LCP
• Flammability rating UL 94 V-0
• Battery contacts: spring stainless steel AISI 301,
nickel-plated throughout. Solder area tin-plated
throughout, min. thickness 5 µm.
• Contact resistance between contacts and the
cell is less than 100 m (measured through
AC 1kHz; depending on the case material of the
cell).
• UL recognition, file E218732
• Operating temperature range: –40/+100°C
±0.3
±
0.3
Model For use with Dimensions (mm) Weight Part.No.*
Renata cell B C DEF (g)
HU357-LF 357 (SR44W) 19.9 11.6 12.0 7.4 18.65 0.84 701133
HU1225-LF CR1225 20.3 12.5 12.7 4.5 19.1 0.70 701105
HU1632-LF CR1632 24.3 16.0 14.5 5.2 23.0 0.80 701131
HU2032-LF CR2032 28.5 20.0 16.1 5.2 27.2 0.95 701106
HU2430-LF CR2430 33.0 24.5 16.1 4.7 31.7 1.05 701107
HU2450N-LF CR2450N
1)
33.0 24.5 16.1 7.3 31.75 1.45 701108
HU2477N-LF CR2477N 33.0 24.5 16.1 10.1 31.8 1.65 701109
Dimensions
*Packaging: Industrial Bulk (IB-Trays)
1) Not suitable for
CR2450HT