Manualshelf

Datasheet

ManualsBrandsRENATA ManualsRechargeablesNon-standard battery (rechargeable) Prismatic Plug LiPo ICP402025PC-1 3.7 V 155 mAh
567891011121314
Model
Description
Rev.
Page
ICP402025PC-01
Lithium-ion Polymer Battery Pack Rev.2.0
10/13
(2) Don’t get into a microwave or a high pressure container
Because of sudden heat or damage of sealing condition of battery, it may cause the
generating, smoke, rupture or flaming.
(3) Don’t use a leaked battery nearby fire
If the liquid leaks from the battery (or the battery gives out bad smell), let the battery
leave from flammable objects immediately. Unless do that, the electrolyte leaked from
battery may catch fire and it would cause the smoke, flaming or rupture of it.
(4) Don’t use an abnormal battery, such as leakage, swelling, deformation, etc.
In case the battery has bad smell, it generates, its color change or it is warped in using
(includes charging and storage), let it take out from equipment or charger and do not use
it. If an abnormal battery is used, it may generate bad performance or damage the device
or pack.
CAUTIONS:
(1) Don’t use or leave the battery under the blazing sun (or in heated car by sunshine)
The battery may smoke, heat or flame. And also, it might cause the deterioration of
battery’s characteristics or cycle life.
(2) Static Electricity
The battery has the protection circuit to avoid the danger. Do not use nearby the place
where generates static electricity (more than 100V) which gives damage to the protection
circuit. If the protection circuit were broken under abnormal handling, the battery would
generate, smoke, rupture or flame.
(3) Manual
Please read the manual before using the battery and let it keep after reading. And also,
please read it necessary.
(4) Charging Method
Please read the manual of specific charger about charging method.
(5) First time use
When the battery has rust, bad smell or something abnormal at first-time-using, do not
use the equipment and go to the shop which it was bought.
DISPOSAL METHOD
The used battery is immersed in NaCl 2~3 % water solution for 1 week. Then, it is disassembled
and this battery should be handled according to all national laws and regulations.