Safety data sheet

Renata SA Tel. +41 (0)61 975 75 75 sales@renata.com
CH-4452 Itingen/Switzerland Fax.
+41 (0)61 975 75 95 www.renata.com
The information and recommendations set forth are made in good faith and believed to be accurate as of the date of preparation. RENATA S.A. makes no warranty, expressed or implied, with
respect to this information and disclaims all liabilities from reliance on it.
Article Safety Data Sheet - Lithium Batteries Version: 2017-12-15
Page 16 of 18
(b) Shipments to or from Mexico. Unless otherwise excepted, hazardous materials shipments from Mexico to the United States or from the United States to Mexico
must conform to all applicable requirements of this subchapter. When a hazardous material that is a material poisonous by inhalation (see §171.8) is transported by
highway or rail from Mexico to the United States, or from the United States to Mexico, the following requirements apply:
(1) The shipping description must include the words “Toxic Inhalation Hazard” or “Poison-Inhalation Hazard” or “Inhalation Hazard”, as required in §172.203(m) of this
subchapter.
(2) The material must be packaged in accordance with requirements of this subchapter.
(3) The package must be marked in accordance with §172.313 of this subchapter.
(4) Except as provided in paragraph (e)(5) of this section, the package must be labeled or placarded POISON GAS or POISON INHALATION HAZARD, as appropriate,
in accordance with subparts E and F of this subchapter.
(5) A label or placard that conforms to the UN Recommendations (IBR, see §171.7) specifications for a “Division 2.3” or “Division 6.1” label or placard may be
substituted for the POISON GAS or POISON INHALATION HAZARD label or placard required by §§172.400(a) and 172.504(e) of this subchapter on a package
transported in a closed transport vehicle or freight container. The transport vehicle or freight container must be marked with identification numbers for the material,
regardless of the total quantity contained in the transport vehicle or freight container, in the manner specified in §172.313(c) of this subchapter and placarded as
required by subpart F of this subchapter.