User manual
Table Of Contents
- 2013 TECHNICAL REGULATIONS
- CONTENTS
- ARTICLE 1 – DEFINITIONS
- ARTICLE 2 - REGULATIONS
- ARTICLE 3 - CHASSIS and BODYWORK
- ARTICLE 4 – WEIGHT
- ARTICLE 5 - ENGINE
- ARTICLE 6 – FUEL FEED SYSTEM
- ARTICLE 7 – LUBRICATION SYSTEM
- ARTICLE 8 - ELECTRICAL SYSTEMS
- ARTICLE 9 - TRANSMISSION
- ARTICLE 10 - SUSPENSION AND STEERING SYSTEMS
- ARTICLE 11 – BRAKES
- ARTICLE 12 - WHEELS AND TYRES
- ARTICLE 13 - COCKPIT
- ARTICLE 14 – SAFETY EQUIPMENT
- ARTICLE 15 – FUEL
- ARTICLE 16 – ELECTRONIC SYSTEMS
- ARTICLE 17 - TIMING TRANSPONDER
- ARTICLE 18 - BINDING TEXT

2013 FORMULA RENAULT 1.6 Technical Regulations -8-
13/03/2013
2.6 - Technical passport
The RENAULT SPORT Scrutineers in charge of the championship will fill out a
technical passport during preliminary scrutineering at the time of the vehicle’s
first participation in said Championship.
Remarks added to this passport must be signed by a representative or the
Competitor at each event.
This passport will remain at the disposal of the Scrutineers, but may be handed
to the Competitor on request.
2.7 - Principles of the technical regulations
Scrutineering may
consist of comparing the part to be checked against the same
new genuine FORMULA RENAULT 1.6 part.
Some parts are identified by specific markings (hologram or engraving). These
markings guarantee that the relevant parts are genuine and must be used. Any
relevant part which does not feature these markings will be considered to be
technically non-compliant.
CATEGORY “A”
No modifications are authorized. The parts classified in
this category must be the genuine parts designed for the
FORMULA RENAULT 1.6, and remain in their original
positions and fulfil the functions for which they were
originally intended.
CATEGORY “B”
Parts in category “A” which are subject to specific
requirements. Only the modifications or requirements
indicated in the regulations or in the 2012 edition of the
FORMULA RENAULT 1.6 Nomenclature are authorized.
CATEGORY “C”
The parts classed in this category are considered to be
unrestricted, on the express condition that the original
function is not bypassed and that no supplementary
functions are added. They must be present in their
original locations. Adapted parts are permitted, but must
be submitted for approval to the RENAULT SPORT
Scrutineers prior to their use.
The set of items or subassemblies that make up a part or assembly are deemed
to belong to the same category as the part or assembly in question.
All the parts that are not represented in the nomenclature systematically belong
to category "A" unless otherwise indicated.
The illustrations of the parts shown are intended to aid and facilitate
understanding of the nomenclature. These drawings are under no circumstances
to be used as a basis for comparison with the genuine parts of the vehicle.
Note: Any addition of parts or assembly of parts that do not feature in the
nomenclature must be approved by RENAULT SPORT technical delegate.