Operation Manual

GB.14
SD card
A SD card is supplied with the naviga-
tion system. Amongst other things, this
includes maps for your country or set of
countries.
Before using the SD card, check that it
is not locked.
Updates (especially of maps) are pub-
lished regularly. They are only avail-
able for download by inserting the SD
card of your navigation system into
your computer's SD port, online at the
“R-Link Store”.
Note: the card SD in use must be for-
matted to FAT32 and have a minimum
capacity of 8GB and a maximum ca-
pacity of 32GB.
Removing the SD
card
From the main menu, press “System”,
then “Remove SD card” to eject the SD
card safely.
To remove the SD card from the SD 1
port, press the card, then release it.
The card will jut out of the slot by a few
millimetres. Pull the card to remove it
completely.
Inserting the SD card
With the ignition off, insert the SD card
in the SD 1 port of your vehicle.
SD CARD: USE, INITIALISATION
Only use your SD card for operat-
ing and updating your navigation
system. Do not insert into any other
device (camera, portable GPS etc.)
or into any other vehicle.
Only use an SD card which is com-
patible with your vehicle's naviga-
tion system.
You can also download maps cover-
ing more countries than your origi-
nal map (e.g. Western Europe).
1
For safety reasons, carry
out these operations when
the vehicle is stationary.
An SD card is fragile:
– do not bend it;
– insert it correctly;
– do not force insertion.