Operation Manual

Rendama
x
Doc890/3456CV02B 21
Dismantling and reassembly
When the unit cannot be placed in position because of its dimensions or weight, the boiler may be
partially dismantled.
When it is necessary to perform extensive dismantling, we advise you to make early contact with
your supplier. The unit can be delivered in parts, each of which has been pretested.
We strongly advise you to have dismantling and reassembly activities carried out by the service
department of your
supplier.
Burner
Type L (mm) B (mm) H (mm) m (kg)
R3401 1010 1150 420 135
R3402 R3501 R3601 1010 1310 500 140
R3403 R3502 R3602 1420 1010 500 210
R3404 R3503 R3603 1420 1110 500 215
R3405 R3504 R3604 1420 1210 500 220
R3406 R3505 R3605 1420 1310 500 225
1
st
Heat exchanger
Type L (mm) B (mm) H (mm) m (kg)
R3401 1010 1150 160 120
R3402 R3501 R3601 1010 1310 160 135
R3403 R3502 R3602 1420 1010 160 180
R3404 R3503 R3603 1420 1110 160 185
R3405 R3504 R3604 1420 1210 160 190
R3406 R3505 R3605 1420 1310 160 195
2
nd
Heat exchanger
Type L (mm) B (mm) H (mm) m (kg)
R3401 1010 1150 160 135
R3402 R3501 R3601 1010 1310 160 150
R3403 R3502 R3602 1420 1010 160 200
R3404 R3503 R3603 1420 1110 160 200
R3405 R3504 R3604 1420 1210 160 210
R3406 R3505 R3605 1420 1310 160 210
Fig. 9 Dimensions and weights of burner and heat exchanger
Flue gas collection chamber
Type L (mm) B (mm) H (mm) m (kg)
R3401 1320 990 400 ‹25
R3402 R3501 R3601 1450 1070 400 ‹25
R3403 R3502 R3602 1950 770 400 ‹35
R3404 R3503 R3603 1950 870 400 ‹35
R3405 R3504 R3604 1950 970 400 ‹35
R3406 R3505 R3605 1950 1070 400 ‹35
Fig. 10 Dimensions and weights of the fl ue gas collection chamber