Specifications

REN 550 S
Output power 14.4 Volt 2 x 75 Watts @ 4 Ohms RMS
2 x 150 Watts @ 4 Ohms MAX
2 x 135 Watts @ 2 Ohms RMS
2 x 275 Watts @ 2 Ohms MAX
Loudspeaker impedance (stereo) 2-16 Ohm
Frequency response 20-30 kHz
Total harmonic content (THD & N) >0,5%
Channel separation >50 dB
Signal to noise ratio >80 dB
Input sensitivity 0.1 - 4 Volts
Input impedance 10 kOhms
Low-Passfilter 50-250 Hz
High-Passfilter 80-2000 Hz
Bass-Boost 0 / +6 / + 18 dB
Supply +12 V (10-15 V)
Fuse 1 x 30 A
Dimensions 255 x 55 x 200 mm
REN 1100 S
Output power 14.4 Volt 4 x 75 Watts @ 4 Ohms RMS
4 x 150 Watts @ 4 Ohms MAX
4 x 135 Watts @ 2 Ohms RMS
4 x 275 Watts @ 2 Ohms MAX
Loudspeaker impedance (stereo) 2-16 Ohm
Frequency response 20-30 kHz
Total harmonic content (THD & N) >0,5%
Channel separation >50 dB
Signal to noise ratio >80 dB
Input sensitivity 0.1 - 4 Volts
Input impedance 10 kOhms
Low-Passfilter 50-250 Hz
High-Passfilter FRONT & REAR 80-2000 Hz
Bass-Boost 0 / +6 / + 18 dB
Supply +12 V (10-15 V)
Fuse 2 x 20 A
Dimensions 255 x 55 x 320 mm
Subject to technical change
ENGLISH
3
Specifications