User`s manual

8
Please read the user‘s manual carefully before the installation and the rst operation
of the amplier.
SPECIFICATIONS REN1000S Mk3
Output Power RMS
Output Power Max.
Loudspeaker impedance (stereo)
Frequency Response
Total Harmonic Distortion
Signal-to-Noise Ratio
Input Sensitivity
Input Impedance
Lowpass Filter
Subsonic Filter
Bass EQ
Line Outputs
Operating Voltage
Fuse Rating
Dimensions (B x H x L)
1 x 225 W @ 4 Ohms
1 x 425 W @ 2 Ohms
1 x 450 W @ 4 Ohms
1 x 850 W @ 2 Ohms
2 – 8 Ohm
15 – 150 Hz (-3 dB)
< 0,5 % (1 kHz)
> 80 dB
0,2 – 5 V
10 kOhm
40 – 150 Hz @ 12 dB/Octave
15 – 55 Hz @ 12 dB/Octave
0 – 12 dB @ 45 Hz
Stereo, fullrange
+12 V (9 – 15 V), negative ground
2 x 25 A
225 x 50 x 287 mm
All Specications are subject to change
WARRANTY
This product meets the current EU minimum warranty requirements, if purchased in countries of the EU. To en-
sureyourwarrantypolicykeepyouroriginalreceiptproongthedateofpurchase.Anydamagetotheproduct
as a result of misuse, abuse, accident, incorrect wiring, improper installation, alteration of date code or barcode
labels, revolution, natural disaster, or any sneaky stuff because someone messed up, repair or alteration out
side of our factory or authorized service centers and any thing else you have done that you should not have
doneisnotcovered.Thiswarrantyislimitedtodefectivepartsandspecicallyexcludesanyincidentalorcon-
sequential damages connected therewith.