User's Manual

RYZ012 Multi-Standard Wireless Communication Module for Bluetooth 5 Low Energy and 802.15.4
R15UH0002EU0103 Rev.1.03 Page 197 of 206
Apr.21.21
21. Integration Instructions
Module integrators must adhere to the integration guidelines in given in the following sections to maintain compliance with the certification
requirements while providing the maximum performance.
Note: Any modifications to the RYZ012 modules are not allowed and may void the users permission to operated the module.
21.1 List of applicable FCC / ISED rules
FCC
ISED
47 CFR Part 15 Subpart C §15.247
RSS-247, Issue 2, February 2017
21.2 Specific Operational Use Conditions
21.2.1 North America (FCC)
The module must not be operated at power levels above 10.0dBm. Host devices that need higher output power may not be marketed without
prior re-certification.
21.2.2 Europe (RED)
The module must not be operated at power levels above 8.4dBm. Host devices that need higher output power may not be marketed in regions
covered by RED regulation without prior re-certification.
21.2.3 Japan (MIC)
The module must not be operated at power levels above 4.8dBm. Host devices that need higher output power may not be marketed without
prior re-certification.
21.3 Layout Guidelines
21.3.1 RYZ012A1
Place module close to the board corner. Do not place any metal in the keep-out area (no traces, planes, components, batteries, screws …).
Ensure the module is properly connected to ground (e.g. ground plane)