Datasheet

Section 17 D/A Converter
Rev. 3.00 Mar 17, 2006 page 768 of 926
REJ09B0283-0300
DACR23
Bit Bit Name Initial Value R/W Description
7 DAOE3 0 R/W D/A Output Enable 3
Controls D/A conversion and analog output.
0: Analog output (DA3) is disabled
1: Channel 3 D/A conversion is enabled; analog
output (DA3) is enabled
6 DAOE2 0 R/W D/A Output Enable 2
Controls D/A conversion and analog output.
0: Analog output (DA2) is disabled
1: Channel 2 D/A conversion is enabled; analog
output (DA2) is enabled
5 DAE 0 R/W D/A Enable
Used together with the DAOE2 and DAOE3 bits to
control D/A conversion. When the DAE bit is
cleared to 0, channel 2 and 3 D/A conversions are
controlled independently. When the DAE bit is set
to 1, channel 2 and 3 D/A conversions are
controlled together.
Output of conversion results is always controlled
independently by the DAOE2 and DAOE3 bits. For
details, see table 17.3.
4
to
0
— All 1 — Reserved
These bits are always read as 1 and cannot be
modified.