Datasheet

Rev. 2.00 Sep. 28, 2009 Page xx of xl
REJ09B0452-0200
Item Page Revision (See Manual for Details)
24.8.4 Storable Areas
for On-Chip Program
and Program Data
Table 24.11 Usable
Area for Erasure in User
Program Mode
795 Table amended
Storable/Executable Area Selected MAT
Item On-Chip RAM User MAT User MAT
Embedded
Program
Storage MAT
Decision of initialization result O O O
Operation for initialization error O O O
Operation for disabling interrupts O O O
Table 24.12 Usable
Area for Programming in
User Boot Mode
796 Table amended
Storable/Executable Area Selected MAT
Item
On-Chip
RAM
User Boot
MAT
User MAT
User Boot
MAT
Embedded
Program
Storage MAT
Determination of initialization
result
O O O
Initialization error processing O O O
Disabling interrupts O O O
Table 24.13 Usable
Area for Erasure in User
Boot Mode
797 Table amended
Storable/Executable Area Selected MAT
Item
On-Chip
RAM
User Boot
MAT
User MAT
User Boot
MAT
Embedded
Program
Storage MAT
Determination of initialization
result
O O O
Initialization error processing O O O
Disabling interrupts O O O
24.12 Standard Serial
Communication Interface
Specifications for Boot
Mode
802 Description amended
2. Inquiry/selection state
In this state, the boot program responds to inquiry
commands from the host. The device name, clock mode,
and bit rate are selected. After selection of these settings,
the program is made to enter the programming/erasing state
by the command for a transition to the programming/erasing
state. The program transfers the libraries required for
erasure to the on-chip RAM and erases the user MATs and
user boot MATs before the transition.