Datasheet

Section 10 16-Bit Timer Pulse Unit (TPU)
Rev. 2.00 Sep. 28, 2009 Page 262 of 994
REJ09B0452-0200
Bit Bit Name
Initial
value
R/W Description
1 TGFB 0 R/(W)* Input Capture/Output Compare Flag B
Status flag that indicates the occurrence of TGRB input
capture or compare match.
[Setting conditions]
• When TCNT = TGRB while TGRB is functioning as
output compare register
• When TCNT value is transferred to TGRB by input
capture signal while TGRB is functioning as input
capture register
[Clearing condition]
When 0 is written to TGFB after reading TGFB = 1
0 TGFA 0 R/(W)* Input Capture/Output Compare Flag A
Status flag that indicates the occurrence of TGRA input
capture or compare match. The write value should
always be 0 to clear this flag.
[Setting conditions]
• When TCNT = TGRA while TGRA is functioning as
output compare register
• When TCNT value is transferred to TGRA by input
capture signal while TGRA is functioning as input
capture register
[Clearing condition]
When 0 is written to TGFA after reading TGFA = 1
Note: * The write value should always be 0 to clear the flag.