Datasheet

Section 24 Flash Memory
Rev. 2.00 Sep. 28, 2009 Page 775 of 994
REJ09B0452-0200
(6) Flash Erase Block Select Parameter (FEBS: General Register ER0 of CPU)
FEBS specifies the erase block number. Settable values range from 0 to 10 (H'00000000 to
H'0000000A). A value of 0 corresponds to block EB0 and a value of 10 corresponds to block
EB10. Do not set a value outside the range from 0 to 10.
Bit Bit Name
Initial
Value
R/W Description
31 to 8 ⎯ Undefined R/W Unused
These bits should be set to 0.
7 to 0 EBS7 to
EBS0
Undefined R/W These bits specify the erase block number from 0 to 10.
A value of 0 corresponds to block EB0 and 10
corresponds to block EB10. Do not set a value outside
the range from 0 to 10 (from H'00 to H'0A).