Datasheet

Section 24 Flash Memory
Rev. 2.00 Sep. 28, 2009 Page 824 of 994
REJ09B0452-0200
Command H'50 Address SUM
• Command, H'50, (one byte): 128-byte programming
• Programming Address (four bytes): End code is H'FF, H'FF, H'FF, H'FF.
• SUM (one byte): Checksum
Response H'06
• Response, H'06, (one byte): Response to 128-byte programming
On completion of programming, the boot program will return ACK.
Error Response H'D0 ERROR
• Error Response, H'D0, (one byte): Error response for 128-byte programming
• ERROR: (one byte): Error code
H'11: Checksum error
H'53: Programming error
An error has occurred in programming and programming cannot be continued.
(d) Erasure Selection
The boot program will transfer the erasure program. User MAT data is erased by the transferred
erasure program.
Command H'48
• Command, H'48, (one byte): Erasure selection
Response H'06
• Response, H'06, (one byte): Response for erasure selection
After the erasure program has been transferred, the boot program will return ACK.
Error Response H'C8 ERROR
• ERROR: (one byte): Error code
H'54: Selection processing error (transfer error occurs and processing is not completed)