Datasheet

Section 12 16-Bit Duty Period Measurement Timer (TDP)
Rev. 3.00 Sep. 28, 2009 Page 343 of 910
REJ09B0350-0300
Bit Bit Name
Initial
Value
R/W Description
4 TPDMXIE 0 R/W Cycle Upper Limit Overflow Interrupt Enable
Enables or disables the issuing of TPDMXOVF interrupt
requests when the TPDMXOVF flag in TDPCSR is set to 1.
0: TPDMXOVF interrupt requests are disabled
1: TPDMXOVF interrupt requests are enabled
3 ICPIE 0 R/W Input Capture Interrupt Enable
Enables or disables the issuing of ICPF interrupt requests
when the ICPF flag in TDPCSR is set to 1.
0: ICPF interrupt requests are disabled
1: ICPF interrupt requests are enabled
2 CMIE 0 R/W Compare Match Interrupt Enable
Enables or disables the issuing of CMF interrupt requests
when the CMF flag in TDPCSR is set to 1.
0: CMF interrupt requests are disabled
1: CMF interrupt requests are enabled
1 TDPIPE 0 R/W Input Capture Input Enable
Enables or disables TDPCYI pin input.
To use input capture and cycle measurement mode, set this
bit to 1.
0: Disabled
1: Enabled
Note: Change this bit when CST = 0 and TDPMDS = 0.
0 TPDMNIE 0 R/W Cycle Lower Limit Underflow Interrupt Enable
Enables or disables the issuing of TPDMNUDF interrupt
requests when the TPDMNUDF flag in TDPCSR is set to 1.
0: TPDMNUDF interrupt requests are disabled
1: TPDMNUDF interrupt requests are enabled