Datasheet

Section 26 Electrical Characteristics
Rev. 4.00 Sep 27, 2006 page 840 of 1130
REJ09B0327-0400
6. The upper limit of the port 6 applied voltage is V
CC
+0.3 V when CIN input is not
selected, and the lower of V
CC
+0.3 V and AV
CC
+0.3 V when CIN input is selected.
When a pin is in output mode, the output voltage is equivalent to the applied voltage.
7. The upper limit of the port A applied voltage is V
CC
B +0.3 V when CIN input is not
selected, and the lower of V
CC
B +0.3 V and AV
CC
+0.3 V when CIN input is selected.
When a pin is in output mode, the output voltage is equivalent to the applied voltage.
8. Port A characteristics depends on V
CC
B (or on V
CC
when other pins are in output mode).
9. Current dissipation values are for V
IH
min = V
CC
–0.5 V, V
CC
B –0.5 V, and V
IL
max = 0.5 V
with all output pins unloaded and the on-chip pull-up MOSs in the off state.
10.The values are for V
RAM
≤ V
CC
< 4.5V, V
IH
min = V
CC
× 0.9, V
CC
B × 0.9, and V
IL
max =
0.3 V.
11.For flash memory program/erase operations, the applicable range is T
a
= 0 to +75°C
(regular specifications).