Datasheet

Rev.7.00 Dec. 24, 2008 Page xviii of liv
REJ09B0074-0700
Item Page Revision (See Manual for Details)
17.6 On-Board
Programming Modes
Table 17.3 Setting
On-Board
Programming Modes
567 Table amended
Mode
SCI boot mode
(HD64F2218,
HD64F2212,
HD64F2211)
USB boot mode
(HD64F2218U,
HD64F2218CU,
HD64F2217CU,
HD64F2212U,
HD64F2212CU,
HD64F2211U,
HD64F2211CU,
HD64F2210CU)
17.6.1 SCI Boot Mode
(HD64F2218,
HD64F2212, and
HD64F2211)
569 Description amended
5. In boot mode, a part of the on-chip RAM area (four kbytes) is
used by the boot program. The area to which the programming
control program is transferred from the host is 8 kbytes
(H'FFC000 to H'FFDFFF) in the HD64F2218 and
HD64F2212 and 4 kbytes (H'FFD000 to H'FFDFFF) in
the HD64F2211 . The boot program area cannot be used
until the execution state in boot mode switches to the
programming control program.
17.6.2 USB Boot
Mode (HD64F2218U,
HD64F2212U, and
HD64F2211U)
573 Description amended
4. In boot mode, the 4-kbyte on-chip RAM area H'FFE000 to
H'FFEFBF is used by the boot program. The programming
control program is transferred from the host stored in the 8-
kbyte area H'FFC000 to H'FFDFFF in the HD64F2218U,
HD64F2218CU, HD64F2212U, and HD64F2212CU and the 4-
kbyte area H'FFD000 to H'FFDFFF in the HD64F2211U,
HD64F2211CU and HD64F2210CU.