Datasheet

Section 8 I/O Ports
Rev.7.00 Feb. 14, 2007 page 261 of 1108
REJ09B0089-0700
Port B Data Register (PBDR)
Bit : 7 6 5 4 3 2 1 0
PB7DR PB6DR PB5DR PB4DR PB3DR PB2DR PB1DR PB0DR
Initial value : 0 0 0 0 0 0 0 0
R/W : R/W R/W R/W R/W R/W R/W R/W R/W
PBDR is an 8-bit readable/writable register that stores output data for the port B pins (PB7 to
PB0). PBDR is initialized to H'00 by a reset, and in hardware standby mode. It retains its prior
state in software standby mode.
Port B Register (PORTB)
Bit : 7 6 5 4 3 2 1 0
PB7 PB6 PB5 PB4 PB3 PB2 PB1 PB0
Initial value : —
*
—
*
—
*
—
*
—
*
—
*
—
*
—
*
R/W : R R R R R R R R
Note: * Determined by state of pins PB7 to PB0.
PORTB is an 8-bit read-only register that shows the pin states. It cannot be written to. Writing of
output data for the port B pins (PB7 to PB0) must always be performed on PBDR.
If a port B read is performed while PBDDR bits are set to 1, the PBDR values are read. If a port B
read is performed while PBDDR bits are cleared to 0, the pin states are read.
After a reset and in hardware standby mode, PORTB contents are determined by the pin states, as
PBDDR and PBDR are initialized. PORTB retains its prior state in software standby mode.