Datasheet

Section 9 16-Bit Timer Pulse Unit (TPU)
Rev.7.00 Feb. 14, 2007 page 335 of 1108
REJ09B0089-0700
Bit 2—Input Capture/Output Compare Flag C (TGFC): Status flag that indicates the
occurrence of TGRC input capture or compare match in channels 0 and 3.
In channels 1, 2, 4, and 5, bit 2 is reserved. It is always read as 0 and cannot be modified.
Bit 2
TGFC Description
0 [Clearing conditions] (Initial value)
• When DTC is activated by TGIC interrupt while DISEL bit of MRB in DTC is 0
• When 0 is written to TGFC after reading TGFC = 1
1 [Setting conditions]
• When TCNT = TGRC while TGRC is functioning as output compare register
• When TCNT value is transferred to TGRC by input capture signal while TGRC is
functioning as input capture register
Bit 1—Input Capture/Output Compare Flag B (TGFB): Status flag that indicates the
occurrence of TGRB input capture or compare match.
Bit 1
TGFB Description
0 [Clearing conditions] (Initial value)
• When DTC is activated by TGIB interrupt while DISEL bit of MRB in DTC is 0
• When 0 is written to TGFB after reading TGFB = 1
1 [Setting conditions]
• When TCNT = TGRB while TGRB is functioning as output compare register
• When TCNT value is transferred to TGRB by input capture signal while TGRB is
functioning as input capture register